NDSE BREWING SOLUTION Supply 7bbl Conical Fermenters Uni Tank For Brwers.

Category: Buy & Sell
Ad Type: Offered Ads
Price: 3500
Country: China
City: Guangdong
Active Till 17-Nov-2018
Phone No: +86-13926547973
NDSE BREWING SOLUTION  supply 7bbl conical fermenters uni tank for brwers.NDSE BREWING SOLUTION  supply 7bbl conical fermenters uni tank for brwers.NDSE BREWING SOLUTION  supply 7bbl conical fermenters uni tank for brwers.
Dimensions to be determined by RSL and customer
Capacity Nominal capacity plus 25%
Top Head ASME dished head (gauge varies based on tank diameter
Lifting Lugs (2) lifting lugs
CIP Removable CIP & fixed spray ball (180° up, 65mm) on 3” TC with 1½” TC line down to working height
Vent Line Only on tanks larger than 60HL


1½” or 2” TC vent line from top head to working height

Sidewall thickness & size varies based on tank size
Bottom Cone 55° to 60° cone angle, 2” knuckle radius to cone – thickness varies based on tank size
Cooling Jacket on sidewall and bottom cone – number of zones determined by tank size


Maximum “20” psi working pressure, 1” to 1½” FNPT inlet / outlet

Thermowell (2)½” FNPT 10” thermowells
PRV (1) 1½” to 2” TC Vacuum Pressure relief valve on top head or vent line tee.
Legs 4-5 pipe legs depending on tank size including bracing and adjustable feet
Insulation 2” insulation on sidewall and bottom cone only – about R12 value
Cladding All welded 14 gauge cladding on sidewall & bottom cone
Manway 14” x 18” side oval in/out swing “no lip” manway


(also manufactured by Ripley Stainless Ltd)

Sample Valve 1” TC RSL Sample valve
Drain (1) 1½” or 2” TC butterfly valve c/w “J” pipe
Racking (1) 1½” or 2” TC butterfly valve
Tank Material All quality inspected 304 stainless steel alloy
Exterior Finish 2B with all welds ribbon polished
Interior Finish 2B with all welds TIG welded with heat stain removed
Tank Pressure Maximum “14.9” psi

Options for an Extra Charge:
•Bright exterior spin polish
•RSL 18” Swivel cone manway
•Cooling Jacket – maximum”35” psi working pressure – maximum”50” psi working pressure
•13” x 17” side oval manway
•Sample valve options
•1½” or 2” Butterfly valve on vent & CIP lines
•Copper banding
•Rotating sprayheads
•Interior weld finish ground and polished to 120 grit

NDSE BREWING SOLUTION Standard sizes include:




Fermentation Tank 3.5 Fermentation Tank 5 Fermentation Tank 7 Fermentation Tank 10
Fermentation Tank 15 Fermentation Tank 20 Fermentation Tank 30 Fermentation Tank 40
Fermentation Tank 60 Fermentation Tank 90 Fermentation Tank 120


Brite Tank J/I 3.5 Brite Tank J/I 5 Brite Tank J/I 7 Brite Tank J/I 10
Brite Tank J/I 15 Brite Tank J/I 20 Brite Tank J/I 30 Brite Tank J/I 40
Brite Tank J/I 60 Brite Tank J/I 90 Brite Tank J/I 120


Brite Tank S/W 3.5 Brite Tank S/W 5 Brite Tank S/W 7 Brite Tank S/W 10
Brite Tank S/W 15 Brite Tank S/W 20 Brite Tank S/W 30 Brite Tank S/W 40
.
All tanks are fabricated using standard material sizes and normal beer tank dimensions.

NDSE BREWING SOLUTIONS is a custom tank fabricator and can design and fabricate tanks to suit your specific requirements. Shop drawings must be approved prior to fabrication

Don′t Forget to Mention That You Find This Ad on ‘PostAddz’ ?

Contact Advertiser

Your Full Name:
Your Email Id:
Your Phone No:
Your Message:

Free Classifieds